FULLY RECONDITIONED STRAND PELLETISERS
We have in stock two used Pelletisers one is ready to be sold the other will be reconditioned in 2023. The first machine is a 200mm Pelletiser suitable for 40 strands, this machine is geared to run at 100m per minute but we can change the drive to suit a lower line speed if required. The base and discharge will be manufactured to suit requirements.
The second machine is a 400mm pelletiser suitable for 80 strands this machine will be assessed in the new year.
ASL200 Pelletiser fully refurbished
The refurbishment of the machine includes the following:
- Rotor reground (rotor has 1-2 regrinds left on diameter)
- Upper feed roll recovered
- New upper roll split shaft
- New lower feed roll
- Lower feed roll bearings and seals replaced with new
- Rotor bearings and seals replaced with new
- Upper feed roll bearings and seals replaced with new
- Scraper blade
- New safety switch on main hood with time delay solenoid
- New safety switch on discharge chute with time delay solenoid
- New spider coupling to lower feed roll
- New 25 tooth glass filled nylon gear
- New15 tooth steel gear
- Pneumatic panel mounted regulator
- Pneumatic filter
- Pressure gauge
- Two fixed and two swivel castors
- Machine mounted on castor mounted base to allow for discharge into sieve
- Hood gas strut replaced
- Machine sand blasted and powder coated RAL5015
- Main hood fitted with Smart mat sound reducing
- Chamber completely stripped, cleaned and built up with new fixings
- Main hood sandblasted primed and powder coated
- Main hood fitted with new hinges
- New belts and pulleys fitted to suit your application
- New chute will be made to suit your requirements
ASL200 Dual Drive Pelletiser fully refurbished specification
Number of strands 40 max
Pellet length 2-4 mm adjustable
Feed Width 200 mm
Cutting chamber Heavy duty bearings used on all rotating parts
Line speed Maximum line speed set to 100m per minute
Rotor speed 1000 RPM
Rotor 36 tooth
Bed Knife Tungsten Carbide 4 edge reversible
Upper Feed Roll Stainless steel Carboxilate nitrile covered to shore 75
Upper shaft Split shaft to release upper core for recovering without removing bearings
Upper roll drive Gears fitted between feed rolls to provide extra strand traction.
U.F.R. Control Pneumatic raise and lower control
Lower Feed Roll Stainless steel ceramic coated
Rotor Drive Power 7.5Kw motor from foot mounted 1500 Rpm
Feed roll drive 1.5Kw 5 :1 gear reduced fitted with 3000 RPM motor
Inverters Telemecanique Inverters synchronised
Discharge Height To suit your requirement
Discharge fixing Easy removable on slide rails and fitted with safety switch
Base Constructed from 60 mm angle iron.
Sound reducing Sound reducing fitted to main hood using sound-smart
Sub base 120x60mm box section with safe deck front step.
Electrics Separate Inverters control pellet adjustment of 2-4mm during production.
Finish Standard R.A.L. 5015 blue powder coated.
Pneumatic Raise /Lower control for upper feed roll with pressure indicator
Machine safety A time delay solenoid locking switch will be fitted to main hood and discharge chute.
The refurbishment of the Pelletiser cutting chamber is complete we will manufacture a new base or modify the existing base to suit your discharge requirements
Please do not hesitate to contact us if you require any further information.
ASL400 Dual drive Pelletiser
We have in stock a used ASL400 machine this machine comes with a large spare parts package which includes spare upper and lower feed rolls, and rotors.The machine will be assessed in the new year and fully reconditioned to a high standard.Price will be determined after refurbishment please contact us if you wish to be kept informed on this machine
ASL400 will handle 80 strands of extruded polymer.
Please contact us if you are interested in either of the above machines or if you require a different size machine we can keep you informed on future reconditioned Pelletisers.
Steven