ASL400 Dual drive pelletiser 2017 model
Machine last used in production in 2021
We are pleased to announce that we have a fully reconditioned 400mm Pelletiser sale, this machine is available with an extensive spare parts package that includes 3 spare rotors and 9 upper feed rolls. Machine is available on a first come basis and the lead time would be six weeks after we tailor the machine to suit your application.
This machine will be fully reconditioned to a very high standard, we will also manufacture a sub-base to suit your feed height requirements.
The transmission can also be tailored to suit your application, this machine will handle a maximum of 80 strands or can be used on lines with less strands.
Transmission speeds and feeds
48 tooth Rotor.
Ceramic coated lower feed roll
Line speed 112m/min can be dropped to 60m min with a motor change.
Strand capacity 80
Throughput based on average specific gravity of material 4 tons per hour with 80 strands.
Throughput can be dropped to 2 ton per hour with drive modification if required.
Strand pellet length 2-4mm adjustable.
Refurbishment of machine will include the following.
- Machine stripped down and deep cleaned.
- All bearings and seals replaced with new.
- Rotor re-ground
- Upper feed roll recovered.
- New base manufactured to standard design.
- Hood sandblasted and powder coated lined with sound reduction.
- New discharge chute fitted.
- Idem locking safety switches fitted to hood and chute to our current design.
- New belts and pulleys fitted.
- New castors fitted.
- Sub-base will be manufactured to suit your feed height requirement.
Machine will be issued with a six-month warranty.
Spare parts package
1 Complete rotor assembly comprising of
2 piece 48 tooth cutters
1 Rotor shaft
2 Eccentric housings
2 Eccentric end caps
2 Distance pieces
2 rotor bearings
Seals and circlips
2 2 Piece 48 tooth cutter
1 Rotor shaft
1 Ceramic coated lower feed roll
1 Complete upper feed roll assembly comprising of
Upper feed roll covered.
Upper feed roll shaft
2 Upper feed roll bearing housings
2 bearings, seals and circlips
1 Tie bar
2 Adjusting screws.
2 Lifting brackets
1 25 tooth gear
4 Upper feed roll split shafts (long side)
1 Upper feed roll split shaft (short side)
1 Upper feed roll complete split shaft different design.
8 Covered upper feed rolls.
2 Lower feed roll bearing housings
2 Scraper blades
1 2-piece carbide bed knife
Please do not hesitate in contacting us if you would like any further information